Disclaimer

Section 1 – Key facts about our products

• Unless a listing says otherwise, parts are used, pre-owned components with prior service history.
• Most parts are imported directly from Japan and were built for Japanese-market vehicles, which can differ from Canadian-market vehicles in specifications, emissions equipment, and design.
• Every engine passes a multi-point inspection and compression test, and we only ship engines with positive compression results. We can provide the results on request.
• Other parts are not bench-tested unless the listing says they were.
• Our limited warranty applies as described, in addition to the legal warranty you have under the law.

Section 2 – Product condition

“Used” means a part was installed and working in a vehicle before it was removed. It does not mean the part is damaged or faulty. Here is what to expect:

Have every part inspected by a qualified mechanic and replace normal wear items during installation.

Section 3 – Warranty

Our limited warranty is described in our Warranty Policy, which sets out coverage periods by part type, covered and excluded components, maintenance requirements, and the claim procedure. Some items, such as electrical and electronic parts, rotary engines, and used performance transmissions, are not covered by our limited warranty.

• Labour: our limited warranty does not cover labour by third parties to remove or install a part, towing, freight, or rental vehicles.
• Maintenance requirements: our limited warranty requires installation and maintenance by a certified mechanic and the maintenance steps in the warranty, including an oil change at 5,000 km.
• Exclusions: damage from overheating, modification, forced induction, racing, or repairs made without our prior authorization is not covered by our limited warranty.

Section 4 – Vehicle compatibility and fitment

JDM parts often share platforms with Canadian-market vehicles but are not always identical. The year, make, model, and engine code in our listings and vehicle finder are a general guide, based on manufacturer specifications and import documentation.

Your responsibility to verify

• Match the engine or transmission code to your vehicle’s factory specification, not just the model name or year.
• Confirm the transmission type (automatic or manual) and drivetrain (FWD, RWD, or AWD).
• Check that sensors, accessory drives, and mounting points will work with your vehicle.
• Ask a mechanic experienced with JDM swaps, or contact us, before ordering if you are unsure.

Common JDM and Canadian-market differences

• Power output, compression, or recommended fuel octane may differ.
• Sensor connectors, oxygen sensor ports, and emissions fittings may differ.
• Transmission gear ratios may differ, which can affect speedometer accuracy.
• Accessory brackets, power steering pumps, and A/C compressor mounts may not match.
• The engine computer (ECU) may need reprogramming, or you may need to use your existing ECU.

Section 5 – Mileage disclosure

Japan’s strict vehicle inspection system (known as “shaken”) encourages owners to replace vehicles earlier than is common in Canada, which is why many JDM engines and transmissions have relatively low mileage. We are not the original owner of these vehicles, however, and cannot independently verify every mileage figure.

• Documented mileage: where a listing shows a mileage figure, it comes from the Japanese auction or dismantler records for the donor vehicle, in kilometres.
• Typical range: used engines have generally been driven 32,000–97,000 km, depending on the year of manufacture.
• Undocumented mileage: if no reliable record was available, the listing shows no mileage figure or says it is unknown, and we make no claim about the part’s mileage.

Section 6 – Emissions, legal use, and long-block pricing

JDM engines and drivetrain parts were built to Japanese standards. Vehicle emissions in Canada are regulated federally under the Canadian Environmental Protection Act, 1999, and by provincial rules where your vehicle is registered. Japan Motor Import makes no representation that a part meets the rules that apply to your vehicle unless the listing says so.

• Your responsibility: confirm that the engine and the finished vehicle will meet federal and provincial requirements, and any inspection required by your licensing authority (for example, the SAAQ in Quebec), before installation.
• Emission control equipment: transfer the emission control devices from your original engine to the replacement engine where required. Removing or disabling emission control equipment can be an offence.
• Off-road and competition use: for vehicles never registered for public roads, compliance with the rules of the relevant sanctioning body is the buyer’s responsibility.

Section 7 – Right-hand-drive (RHD) vehicles

The RHD vehicles we sell were built for the Japanese market, not to Canadian motor vehicle safety standards. Transport Canada generally allows such vehicles to be imported once they are at least 15 years old.

• Before buying, confirm with your provincial licensing authority (for example, the SAAQ in Quebec) what inspections and documents are needed to register the vehicle.
• Confirm with your insurer that the vehicle can be insured for your intended use.
• Gauges, lighting, labels, and manuals may be in Japanese or metric units, and replacement parts may be harder to source than for Canadian-market models.
• Each listing describes the vehicle’s condition and the documents included. Ask us for any detail you need before you buy.

Section 8 – OEM brand and trademark disclaimer

Japan Motor Import is an independent importer and retailer. We are not an authorized dealer, affiliate, or licensee of any vehicle manufacturer. Brand names, model names, and engine codes, including Honda, Acura, Toyota, Lexus, Scion, Nissan, Infiniti, Subaru, Mazda, Mitsubishi, Suzuki, Hyundai, Kia, and Genesis, are trademarks of their owners and are used only to describe compatibility and the vehicles parts came from.

When we call a part “OEM,” we mean it was made by or for the original vehicle manufacturer and fitted at the factory. It does not mean the part is sold through a manufacturer’s authorized dealer network.

Section 9 – Website information

• We update product information, prices, and fitment data regularly, but errors can occur. If we find an error after you order, we will contact you before shipping.
• Photos show the actual part or its typical condition. Colours may look different depending on your screen.
• We may correct listings at any time. Corrections do not affect orders that have already shipped.

Section 10 – Installation and professional advice

Information on our website and from our team is general guidance to help you choose a part. It is not a substitute for an inspection and diagnosis by a qualified mechanic who can see your vehicle.

If you choose our local installation service, the labour warranty and terms provided with that service apply to the installation work.

Section 11 – Limitation of liability

To the extent permitted by law, Japan Motor Import is not liable for indirect or consequential losses arising from a part bought from us, such as third-party labour or diagnostic fees, towing, rental vehicles, lost income, or loss of use of a vehicle, and our total liability is limited to the price you paid for the part.

These limitations do not apply where the law prohibits them. They do not limit the legal warranty or any other right of consumers under the Quebec Consumer Protection Act, which prohibits a merchant from excluding liability for its own acts, or the consumer protection laws of your province.

Section 12 – Handling and safety

• Engines, transmissions, and front clips are heavy. Use proper lifting equipment and protective gear when receiving, moving, or installing them.
• Parts may contain residual oil, coolant, or transmission fluid. Handle them carefully and dispose of fluids according to the environmental rules of your province.
• Inspect every freight delivery before signing, as described in our Shipping Policy.
• If you have a safety concern about a part, contact us before going further.

Section 13 – Buyer responsibilities

1. Verify fitment first. Confirm the part matches your vehicle, engine code, and transmission type before ordering.
2. Read the full listing. Each listing describes the condition of the item you are buying.
3. Use a certified mechanic. Proper installation is required for our limited warranty and for your safety.
4. Check provincial rules. Make sure the installation or vehicle can be registered and inspected where you live.
5. Inspect on arrival. Check the packaging before signing, inspect the part before installing it, and report any problem right away.

Section 14 – Changes to this disclaimer

We may update this disclaimer at any time. The date at the top of this page shows the latest revision. Changes do not affect orders already placed.